What should be paid attention to when using the brush cutter

The brush cutter is a two-stroke power. During use, attention should be paid to the three aspects of power, use and tools to ensure the normal use of the machine:

1. Engine:

A. Qualified gasoline and engine oil, ensure their mixing ratio (25:1);

B. Regularly (25 hours) check and replace the air filter and check the spark plug;

C. After working a tank of oil, you should rest for 10 minutes, and clean the loose gasket of the machine after each work to ensure heat dissipation;

D. When storing, it is necessary to clean up the body, let off the mixed fuel, and burn the fuel in the carburetor; remove the spark plug, add 1-2ml of two-stroke oil to the cylinder, pull the starter 2-3 times, and install the spark plug.

2. Transmission: regularly (25 hours) add grease to the reduction box, and at the same time, add grease to the junction of the upper part of the transmission shaft and the clutch disc.

3. Knife: The length of the nylon cable head should be controlled <=15cm. When using the blade, the balance of the blade should be ensured, and the blade with vibration should not be used.